HYLOC

Tube fittings as per IS 8805

Tube to tube fittings: Straight couplings, Equal Elbow, Equal Tee and Equal Cross fittings

Male stud fittings: Parallel Male stud fittings, Elbows with Elastomeric seals and O' Ring Sealing (BSP, Metric and UNF stud ends) Taper Male stud fittings and Elbows (BSPT and NPT stud ends)

Bulkhead fittings: Straight and Elbow Bulkhead fittings

Weld fittings: Saddle Boss, Weldable nipples

Female Stud fittings: Straight Female stud fittings, Pressure guage adaptors

Reducers: Male / Female thread adaptors, Reducing standpipes

Nominal Pressure ratings for fittings (o.d.)

Series LL (-4, 6, 8, 10, 12) (-100 bar.)

Series L (-6, 8, 10, 12, 15, 18) (-315 bar); (-22, 28, 35, 42) (-160 bar)

Series H (-6, 8, 10, 12, 14) (-630 bar); (-16, 20, 25, 30) (-400 bar); (-38 o.d.)  (-315bar)

Flanges:

Buttweld type Solid, Swivel, Socket and Blind Flanges conforming to mounting interface as per SAE J518c, ISO 6162, ISO 6164 standards in High Pressure and Standard Pressure series.

Tube & Pipe Clamps:

These are used in installations to provide rigid support to the pipes both in lateral and longitudinal directions relieving stresses caused by unequal movements in the pipe line. The use of clamps will also prevent the transmission of vibrations from the pipe to the frame and vice versa. Loosening of joints, welds and leakage in the system can be avoided by the regidity.

These are available in metric series from - Tube o.d. of 6mm to 150 mm as well as in Inch series from pipe o.d. of 1/4" to 6/12" and NB tubes from 1/8" to 6"

Shut Off Valves & Needle Valves:

These are two way, seat type valves. These are used for isolation the oil flow. The valves are available in Sub-plate mounting, In-line and Right angle style.

Size range - G 1/4, G 3/8, G 1/2, G 3/4, G1, G1 1/4 and G1 1/2

Pressure Rating - 350 bar.

Shut Off Valves (Screw in and Slip in Cartridge)

These valves are with replacable cartridge. Balanced poppet construction to reduce operating forces. The valves are available in Sub-plate mounting, In-line and Right angle style.

Screw in Cartridge: (Size range - NG 16, NG 25) - (Pressure Rating - 315 bar)

Slip in Cartridges: (Size range - NG 16, NG 25, NG 32, NG 40, NG 50, NG 63, NG 80 & NG 100) - (Pressure Rating - 400 bar) 

Gauge Isolating Valves

These valves are used for checking the system pressure to which it is connected. These valves are available in Sub-plate mounting and panel mounting style.

Suitable for Gauge - G 1/4, G 3/8, G 1/2

Pressure Rating - 315 bar

Adjustable Throttle & Throttle / Check Valves

Throttle Valves allow adjustable throttled flow in both the directions. Throttle / Check valves give adjustable flow in one direction and allow free flow in opposite direction.

Working Pressure - 315 bar

Size Range - G 1/4, G 3/8, G 1/2, G 3/4, G 1, G1 1/4, G1 1/2

Quick Disconnect Couplings

These are designed for applications where fast connection and disconnection of hydraulic lines is a need of the system. These couplings when connected offer unrestricted flow passage. These are designed for reliable and safe operations by avoiding premature flow before the coupling is fully closed.

Size Range - G 1/4, G 3/8, G 1/2, G 3/4, and G1

Pressure Rating - 400 to 800 bar

Minimess Couplings

These are intended to provide facility to access system pressure for the purpose of pressure measurement. For transmitting pressure through these couplings to the measuring devices, no special tools are needed. These couplings can be connected by hand even at rated pressure. These couplings also can be used for purging air from the system.

Sizes for hose ends - M16 x 1.5, M16 x 2.0; Special threads 12 x 1.5

Pressure Rating - 400 bar